Video

Kima Heating Cable Plug In with heat protection 8 m

• Info
• Stock status

  Product ID600733

  Manufacturer

  Characteristics

  Heating cable with an output of 10 W/m, designed for 230 V, with a built-in thermostat at the end of the cable to prevent overheating.

  It is intended for frost protection of pipes or hoses through internal or external installation.

  For internal installation, a cable gland is required (item no.: 600764).

  An optional Y-connector is available to simplify internal installation (item no.: 604743).

  The outer sheath of the heating cable is approved for internal installation in drinking water pipes with a maximum pressure of 10 bar.

  The built-in thermostat cuts off the power if the cable is at risk of overheating.

  When switched on, the heating cable operates at full output regardless of the temperature.

  The heating cable must never be cut.

  Includes a 2 m non-heating connection cable with plug.

  Must be installed with a residual current device.

• Product groups
• Heated Basins and Cables
  
• Reviews